Screw Pin Shackles

G-209 / S-209

G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 2, except for those provisions required of the contractor. For additional information, see page 452.
  • Capacities 1/3 thru 55 metric tons, grade 6.
  • Forged – Quenched and Tempered, with alloy pins.
  • Working Load Limit and grade “6” permanently shown on every shackle.
  • Hot Dip galvanized or self colored.
  • Fatigue rated.
  • Shackles 25t and larger are RFID EQUIPPED.
  • Shackles can be furnished proof tested with certificates to designated standards, such
    as ABS, DNV, Lloyds, or other certification. Proof testing and certification
    available when requested at the time of order, charges will apply.
  • Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).
  • 3.25t through 25t G209 anchor shackles are type approved to DNV Certification Notes
    2.7-1- Offshore Containers. These shackles are statistical proof and impact tested to 42
    joules (31 ft-lbs.) min. avg. at -20 degrees C (-4 degrees F). The tests are conducted by
    Crosby and 3.1 test certification is available upon request.
  • All other 209 and all 210 shackles can meet charpy requirements of 42 joules(31 ft-lbs)
    avg. at -20 degrees C (-4 degrees F) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules
    1-1-17.7, and ABS Guide for Certification of Cranes.
  • Crosby 3.25t through 25t G209 anchor shackles are type approved to DNV Certification
    Notes 2.7-1 – Offshore Containers. These Crosby shackles are statistical proof and
    impact tested. The tests are conducted by Crosby and 3.1 test certification is available
    upon request.
  • Look for the Red Pin®. . . the mark of genuine Crosby quality.

G-210 / S-210

G-210 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271F Type IVB, Grade A, Class 2, except for those provisions required of the contractor. For additional information, see page 452.

G-209 / S-209 Screw Pin Anchor Shackles

Nominal
Size
(in.)		 Working
Load Limit
(t)*		 Stock No. Weight
Each
(lbs.)		 Dimensions (in.) Tolerance
+ / –
G-209 S-209 A B C D E F G H L M P C A
3/16 1/3 1018357 – .06 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.14 .19 .06 .06
1/4 1/2 1018375 1018384 .10 .47 .31 1.13 .25 .78 .61 1.28 1.84 .19 1.43 .25 .06 .06
5/16 3/4 1018393 1018400 .18 .53 .38 1.22 .31 .84 .75 1.47 2.09 .22 1.71 .31 .06 .06
3/8 1 1018419 1018428 .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.02 .38 .13 .06
7/16 1-1/2 1018437 1018446 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.37 .44 .13 .06
1/2 2 1018455 1018464 .72 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06
5/8 3-1/4 1018473 1018482 1.37 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06
3/4 4-3/4 1018491 1018507 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06
7/8 6-1/2 1018516 1018525 3.62 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06
1 8-1/2 1018534 1018543 5.03 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.13 1.06 .25 .06
1-1/8 9-1/2 1018552 1018561 7.41 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.71 1.25 .25 .06
1-1/4 12 1018570 1018589 9.50 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.25 1.38 .25 .06
1-3/8 13-1/2 1018598 1018605 13.53 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.83 1.50 .25 .13
1-1/2 17 1018614 1018623 17.20 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 .81 7.33 1.62 .25 .13
1-3/4 25 1018632 1018641 27.78 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 1.00 9.06 2.25 .25 .13
2 35 1018650 1018669 45.00 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.35 2.40 .25 .13
2-1/2 55 1018678 1018687 85.75 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13.00 3.13 .25 .25